4GB RAM 32GB eMMC Query Terminal for Pharmacy Information Desk, WF-K3601, AndroidSBC, Osaka

TL;DR: 4GB RAM 32GB eMMC Query Terminal for Pharmacy Information Desk

AndroidSBC peripheral desk: printer, scanner and card reader driver SDK declared production-ready serving Osaka, Japan. The WF-K3601 self-service query terminal Android motherboard spans the single-screen touch query all-in-one terminal and eleven sister models in the WF-K series, all built on the RK3568 quad-core ARM Cortex-A55 2.0GHz 64-bit SoC with the ARM Mali-G52 2EE GPU, 1080p HDMI plus LVDS panel output, and Android 11 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-K family from the Longgang source factory in Shenzhen to Osaka and Japan importers who run hospital information points, bank branch lobbies, government service halls, mall directory stations, airport concourses and outdoor query cabinets.

About AndroidSBC and the Self-Service Query Terminal Android Motherboard Family

AndroidSBC is the export arm of Wanlin Manufacturing Group. Its WF-K series addresses the self-service query terminal segment with twelve boards on eight chips, all produced in the Longgang source factory in Shenzhen. Osaka and Japan buyers typically start from one pilot model and then scale the same board across a wider estate. Every model is validated on the same burn-in rig in Longgang before it is packed for Japan, and the same rig logs are available on request.

WF-K3601 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-K3601 (single-screen touch query all-in-one terminal) maintains its 4K HDMI output plus capacitive touch sampling while running the burn-in test loop, a configuration that competing single-platform boards cannot sustain at 60fps. For Japan importers sourcing the WF-K family, the WF-K3601-A variant is the typical configuration for the hospital outpatient query rollout use case, with a sustained weekly capacity of 5000 pcs/wk.

Challenges in Sourcing Self-Service Query Terminal Android Motherboards for Japan Buyers

The hard part of a query terminal project in Japan is rarely the processor. It is keeping the touch controller, the printer firmware and the peripheral interfaces on one qualified baseline while Osaka rolls the same board across very different sites.

Public-sector tenders in Osaka now ask for the compliance chain up front. The PSE under the DENAN law with the MIC Giteki mark route used in Japan has to be traceable from the board label back to the test house, which is a sourcing criterion rather than a formality. AndroidSBC deals with it by treating the Osaka requirement as one lot of 69400 units on one BOM, quoted on September 22, 2026 and shipped over the Tokyo - Shanghai lane.

Competitive Comparison: WF-K3601 vs Competing Self-Service Query Terminal Android Boards

For aan Osaka project the comparison is not a single chip benchmark. It is what the board carries into Japan deployment as standard.

• Platform breadth: twelve models on eight chips (RK3588, RK3568, RK3566, RK3288, RK3399, A133, H618, T527), so {city} integrators can move between tiers without changing driver stack or mounting pattern.
• Bundled integration: touch, printer, scanner, card reader, camera and voice driver SDK ships in the carton; competing query boards sold to {city} usually ship a board only.
• Compliance files: CE, FCC, RoHS and the destination conformity route travel with the lot, which competing board vendors often leave to the {city} integrator to obtain.
• Long-term supply: one fixed BOM per production lot and a seven-year firmware window, against the frequent silicon swaps seen on competing query boards reaching {city}.

Global Self-Service Query Terminal / Information Kiosk Market Trends

Query terminals are becoming the default front door for routine information requests. In Japan this is visible in tenders that bundle the single-screen touch query all-in-one terminal with identity peripherals and printing, and Osaka integrators are quoting against those bundles rather than against bare boards.

• Volume shift to board-level sourcing: more integrators now buy the motherboard rather than the finished kiosk, which is why the WF-K3601 and WF-K5270 tiers ship in board form with the enclosure left to the local partner.
• Dual-screen becomes the default: hall display plus touch query on one board is replacing two separate devices, and the WF-K5270 and WF-K8800 configurations address that pattern directly.
• Longer service life expectations: operators now plan five to seven years per query terminal, which favours a fixed BOM such as the WF-K8800 over boards that re-spin silicon between lots.

The direction of travel for Osaka is towards fewer board variants deployed across more sites, which is exactly the configuration the WF-K series was built around for Japan.

Partner Success Story: Hanul Info Query (bank and clinic kiosk supplier)

The Hanul Info Query case in the Korea financial and medical segment is a working example of how the WF-K family from AndroidSBC supports Osaka integrators. Hanul Info Query shipped 69400 bilingual query terminals to bank and clinic networks.

• OEM relationship: AndroidSBC private-label SKU shipped with Hanul Info Query branding and CE / FCC / RoHS files bundled.
• Silicon lock: Rockchip RK3588 8nm, RK3568 or RK3566 22nm, RK3288 or RK3399 28nm, or the Allwinner A133, H618 and T527 tiers as agreed, one fixed BOM per production lot.
• Peripheral driver SDK: bundled into the source-factory shipment, covering capacitive touch, thermal printer, receipt printer, document scanner, A4 printer, barcode scanner, QR code, NFC, RFID, card reader, ID reader, face recognition, voice module, speaker amplifier and microphone.
• Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback bundled.
• Compliance paperwork: CE / FCC / RoHS plus METI / MIC conformity, all bundled into the Shenzhen source-factory shipment.

Hanul Info Query Platform Lead for Korea Financial and Medical noted: Hanul Info Query needed bilingual on-screen assistance from a single board, and the 69400 WF-K units deployed in Osaka now serve both bank branches and clinic waiting halls.

Field Report: outpatient self-service query rollout at a regional hospital group

BAOLONG, Shenzhen, September 22, 2026 - Ke Xin, AndroidSBC field desk. The WF-K3601 run shipped with the single-screen touch query all-in-one terminal profile pre-flashed, which shortens the commissioning step for Japan integrators. The WF-K3601 self-service query terminal Android motherboard order for Osaka, Japan cleared the burn-in station on schedule and is en route via the Tokyo - Shanghai lane.

The WF-K3601 single-screen touch query all-in-one terminal production lot includes the WF-K3601-A variant as the typical configuration, with touch panel, thermal printer and document scanner driver SDK plus staged OTA management bundled into the source-factory shipment. For Japan integrators, the METI / MIC conformity plus PSE under the DENAN law with the MIC Giteki mark paperwork is bundled.

Filed by Ke Xin, AndroidSBC field desk, BAOLONG, Shenzhen. Japanese hospitals specify query boards with silent touch response, precise number formatting and a long service life per terminal.

WF-K3601 Application Scenarios

The WF-K3601 single-screen touch query all-in-one terminal sits inside a twelve-variant WF-K self-service query terminal Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-K3601-A configuration is the typical build for the hospital outpatient query rollout use case, with touch panel and identity peripheral driver SDK plus staged OTA management bundled.

• Hospital and clinic information points: the WF-K3601 drives a touch query station at the entrance while the hall display shows the same information set to waiting visitors in Osaka.
• Bank and financial branch lobbies: touch query plus counter display from one board, with card reader and ID reader integrated for account and product lookups.
• Government service halls: the WF-K3566 runs tax, social security and real estate information lookup, with printing available on the same board.
• Shopping mall directories: the WF-K3288 serves mall directory and wayfinding lookup, with the advertising screen running an independent content loop.
• Airport and train station concourses: high-brightness information query where the WF-K3399 has to stay readable under strong ambient light.
• Retail and pharmacy price or product lookup: compact stations where the WF-K1330 fits a narrow counter without structural work.
• Outdoor and unheated information cabinets: the industrial tier holds the wide temperature window and 7x24 duty cycle for street-level query points.
• Multi-language public information points: on-screen lookup in more than one language from a single board, with voice assistance where the venue requires it.
• Retrofit programmes in Osaka: the same board re-uses the existing enclosure, panel and mounting pattern so an installed estate can be upgraded board by board.

Partnership Models for Osaka Buyers

AndroidSBC structures Osaka partnerships around how much integration the local partner keeps in house, with Japan projects typically choosing between three levels.

• Distribution track: the partner buys the WF-K board against a published price list, keeps its own stock, and AndroidSBC supplies the driver SDK and compliance files with each lot.
• Integration track: the partner takes the board plus firmware customisation, enclosure drawings and peripheral validation support, with a joint qualification run at the Longgang factory.
• Private-label track: the WF-K board ships under the partner brand with customised boot logo, packaging and documentation, on a fixed BOM held for the length of the agreement.

The tracks are not exclusive of each other, and Osaka partners commonly run distribution on one product line and private label on another for the same Japan customer base.

Frequently Asked Questions

Does the WF-K self-service query terminal Android motherboard family support a single-screen touch query all-in-one terminal?

Answer: Yes, and it is qualified on the same production line as the rest of the family. The single-screen touch query all-in-one terminal runs on the WF-K baseline image that Japan buyers receive, so there is no separate integration project.

What is the real difference between the RK3568 tier and the other silicon tiers in the WF-K family?

Answer: The RK3568 tier sits at a specific point on the price-versus-headroom curve. Below it the boards suit single-screen information lookup; above it they support dual-screen independent display and heavier video work, and AndroidSBC documents that mapping for Osaka buyers.

Can AndroidSBC handle CE / FCC / UKCA / RoHS / REACH paperwork for Japan?

Answer: Yes. Compliance files for Japan are bundled into the source-factory shipment to Osaka, and AndroidSBC provides the underlying test reports as well as the certificates on request.

What are the MOQ and lead time for a first order of the WF-K self-service query terminal family?

Answer: For Osaka the entry MOQ is low enough to validate one site before committing to an estate, with 1-3 day samples and a 15-30 day first bulk lead time for Japan.

Does AndroidSBC develop custom Android ROM or custom Linux builds for the WF-K family?

Answer: Yes. Custom ROM work on the WF-K family is scoped per Osaka project rather than sold as a generic service, which keeps the Japan deliverable tied to a specific deployment.

How are software updates and long-term support handled on the WF-K family?

Answer: Software updates on the WF-K family are staged rather than immediate, with rollback available at each step, which matters when aan Osaka estate is live and Japan sites cannot tolerate an unplanned outage.

Can AndroidSBC ship to Amazon FBA or 3PL consolidation warehouses for the WF-K family?

Answer: Yes. Boards for Osaka can be routed straight into Amazon FBA or a third-party 3PL in Japan, with the labelling and packing specification confirmed before the lot is packed.

How are RMA and DOA replacements handled on the WF-K self-service query terminal family?

Answer: RMA and DOA units are handled against the production lot, since every WF-K board is logged against its firmware revision and burn-in result before it leaves Shenzhen. Osaka partners report against the lot number and AndroidSBC matches it to the rig log.

Contact AndroidSBC: Start Your WF-K3601 Sourcing Conversation

AndroidSBC, a Wanlin Manufacturing Group export brand, opens the following channels for the WF-K self-service query terminal family. Osaka integrators can reach the export desk through:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

For Osaka and Japan the sample lead is 1-3 days and the mass-production lead is 15-30 days. AndroidSBC, a Wanlin Manufacturing Group export brand, commits to a seven-year firmware update window.