Government Hall Query Face Recognition for Hospital Information Point, WF-K3288, AndroidSBC, Osaka

TL;DR: Government Hall Query Face Recognition for Hospital Information Point

AndroidSBC supply desk: LPDDR4X and eMMC allocations locked for the WF-K query board family serving Osaka, Japan. The WF-K3288 self-service query terminal Android motherboard spans the legacy query terminal refresh with hall display and eleven sister models in the WF-K series, all built on the RK3288 quad-core ARM Cortex-A17 1.8GHz SoC with the ARM Mali-T764 GPU, 1080p HDMI plus LVDS, and Android 10 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-K family from the Longgang source factory in Shenzhen to Osaka and Japan importers who run hospital information points, bank branch lobbies, government service halls, mall directory stations, airport concourses and outdoor query cabinets.

About AndroidSBC and the Self-Service Query Terminal Android Motherboard Family

The self-service query terminal Android motherboard family from AndroidSBC is manufactured end to end by Wanlin Manufacturing Group in Longgang, Shenzhen. Eight silicon tiers and twelve models let Osaka integrators match cost to duty cycle, while the shared firmware baseline keeps field spares interchangeable across Japan sites. The factory ships to Japan on a factory-direct basis, with the driver SDK, compliance files and mounting drawings bundled into the same carton as the boards.

WF-K3288 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-K3288 (legacy query terminal refresh with hall display) maintains its 4K HDMI output plus capacitive touch sampling while running the burn-in test loop, a configuration that competing single-platform boards cannot sustain at 60fps. For Japan importers sourcing the WF-K family, the WF-K3288-A variant is the typical configuration for the installed-base query terminal refresh use case, with a sustained weekly capacity of 5000 pcs/wk.

Challenges in Sourcing Self-Service Query Terminal Android Motherboards for Japan Buyers

A Japan rollout exposes board weaknesses quickly: a query terminal that works in a climate-controlled showroom in Osaka may not survive an unheated entrance lobby or an outdoor transit plaza.

Then comes documentation. Aan Osaka importer needs the METI / MIC evidence trail behind PSE under the DENAN law with the MIC Giteki mark to clear customs in Japan without holding the shipment at Port of Tokyo for paperwork reasons. For Osaka the outcome is a repeatable 139000-unit batch, confirmed on September 22, 2026, with the Tokyo - Shanghai lane booked ahead so Japan sites are not waiting on logistics.

Competitive Comparison: WF-K3288 vs Competing Self-Service Query Terminal Android Boards

Compared with the general query boards Osaka buyers see quoted for Japan, the WF-K configuration differs mainly in platform breadth and in what ships in the carton.

• Platform breadth: twelve models on eight chips (RK3588, RK3568, RK3566, RK3288, RK3399, A133, H618, T527), so {city} integrators can move between tiers without changing driver stack or mounting pattern.
• Bundled integration: touch, printer, scanner, card reader, camera and voice driver SDK ships in the carton; competing query boards sold to {city} usually ship a board only.
• Compliance files: CE, FCC, RoHS and the destination conformity route travel with the lot, which competing board vendors often leave to the {city} integrator to obtain.
• Long-term supply: one fixed BOM per production lot and a seven-year firmware window, against the frequent silicon swaps seen on competing query boards reaching {city}.

Global Self-Service Query Terminal / Information Kiosk Market Trends

Information access is being treated as infrastructure in Japan, and that changes what is procured. Instead of one-off kiosks, Osaka operators specify the legacy query terminal refresh with hall display as a standard unit to be repeated across a whole estate on the same firmware.

• Volume shift to board-level sourcing: more integrators now buy the motherboard rather than the finished kiosk, which is why the WF-K3288 and WF-K1330 tiers ship in board form with the enclosure left to the local partner.
• Dual-screen becomes the default: hall display plus touch query on one board is replacing two separate devices, and the WF-K1330 and WF-K1331 configurations address that pattern directly.
• Longer service life expectations: operators now plan five to seven years per query terminal, which favours a fixed BOM such as the WF-K1331 over boards that re-spin silicon between lots.

What this means for Osaka is that the query board is no longer a disposable line item. It is the component that determines whether Japan deployments can be extended rather than rebuilt.

Partner Success Story: Hanul Info Query (bank and clinic kiosk supplier)

The Hanul Info Query rollout in the Korea financial and medical segment shows how the WF-K family from AndroidSBC supports Osaka integrators. Hanul Info Query shipped 139000 bilingual query terminals to bank and clinic networks.

• OEM relationship: AndroidSBC private-label SKU shipped with Hanul Info Query branding and CE / FCC / RoHS files bundled.
• Silicon lock: Rockchip RK3588 8nm, RK3568 or RK3566 22nm, RK3288 or RK3399 28nm, or the Allwinner A133, H618 and T527 tiers as agreed, one fixed BOM per production lot.
• Peripheral driver SDK: bundled into the source-factory shipment, covering capacitive touch, thermal printer, receipt printer, document scanner, A4 printer, barcode scanner, QR code, NFC, RFID, card reader, ID reader, face recognition, voice module, speaker amplifier and microphone.
• Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback bundled.
• Compliance paperwork: CE / FCC / RoHS plus METI / MIC conformity, all bundled into the Shenzhen source-factory shipment.

In the words of Hanul Info Query Platform Lead for Korea Financial and Medical: Hanul Info Query needed bilingual on-screen assistance from a single board, and the 139000 WF-K units deployed in Osaka now serve both bank branches and clinic waiting halls.

Field Report: installed-base query terminal refresh at a social security service hall

NANSHAN, Shenzhen, September 22, 2026 - Lin Yao, AndroidSBC field desk. Every WF-K3288 unit in the lot was checked against the same mounting drawing, since Japan retrofit projects re-use existing cabinets. The WF-K3288 self-service query terminal Android motherboard order for Osaka, Japan cleared the burn-in station on schedule and is en route via the Tokyo - Shanghai lane.

The WF-K3288 legacy query terminal refresh with hall display production lot includes the WF-K3288-A variant as the typical configuration, with touch panel, thermal printer and document scanner driver SDK plus staged OTA management bundled into the source-factory shipment. For Japan integrators, the METI / MIC conformity plus PSE under the DENAN law with the MIC Giteki mark paperwork is bundled.

Filed by Lin Yao, AndroidSBC field desk, NANSHAN, Shenzhen. Japanese hospitals specify query boards with silent touch response, precise number formatting and a long service life per terminal.

WF-K3288 Application Scenarios

The WF-K3288 legacy query terminal refresh with hall display sits inside a twelve-variant WF-K self-service query terminal Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-K3288-A configuration is the typical build for the installed-base query terminal refresh use case, with touch panel and identity peripheral driver SDK plus staged OTA management bundled.

• Hospital and clinic information points: the WF-K3288 drives a touch query station at the entrance while the hall display shows the same information set to waiting visitors in Osaka.
• Bank and financial branch lobbies: touch query plus counter display from one board, with card reader and ID reader integrated for account and product lookups.
• Government service halls: the WF-K6180 runs tax, social security and real estate information lookup, with printing available on the same board.
• Shopping mall directories: the WF-K5270 serves mall directory and wayfinding lookup, with the advertising screen running an independent content loop.
• Airport and train station concourses: high-brightness information query where the WF-K8800 has to stay readable under strong ambient light.
• Retail and pharmacy price or product lookup: compact stations where the WF-K8801 fits a narrow counter without structural work.
• Outdoor and unheated information cabinets: the industrial tier holds the wide temperature window and 7x24 duty cycle for street-level query points.
• Multi-language public information points: on-screen lookup in more than one language from a single board, with voice assistance where the venue requires it.
• Retrofit programmes in Osaka: the same board re-uses the existing enclosure, panel and mounting pattern so an installed estate can be upgraded board by board.

Partnership Models for Osaka Buyers

Rather than a single reseller agreement, AndroidSBC offers Osaka partners three routes into the Japan market, each with a different level of factory involvement.

• Distribution track: the partner buys the WF-K board against a published price list, keeps its own stock, and AndroidSBC supplies the driver SDK and compliance files with each lot.
• Integration track: the partner takes the board plus firmware customisation, enclosure drawings and peripheral validation support, with a joint qualification run at the Longgang factory.
• Private-label track: the WF-K board ships under the partner brand with customised boot logo, packaging and documentation, on a fixed BOM held for the length of the agreement.

Whatever track aan Osaka partner selects, the underlying board, firmware baseline and compliance files are identical, which keeps Japan conversations about commercial terms rather than technical risk.

Frequently Asked Questions

Does the WF-K self-service query terminal Android motherboard family support a legacy query terminal refresh with hall display?

Answer: Yes. AndroidSBC treats the legacy query terminal refresh with hall display as a stock case on the WF-K family and validates it on every tier that could plausibly run it, including the entry and industrial parts.

What is the real difference between the RK3288 tier and the other silicon tiers in the WF-K family?

Answer: The RK3288 tier carries its own process node, GPU and NPU rating, and AndroidSBC publishes all three per model so Osaka integrators can compare on facts rather than on marketing labels.

Can AndroidSBC handle CE / FCC / UKCA / RoHS / REACH paperwork for Japan?

Answer: Yes, and the paperwork is treated as part of the product rather than an add-on. For Japan orders the CE, FCC, RoHS and REACH set is prepared alongside the production lot bound for Osaka.

What are the MOQ and lead time for a first order of the WF-K self-service query terminal family?

Answer: MOQ is quoted per model rather than per family, so aan Osaka integrator can pilot one tier for Japan without buying across all twelve. Samples take 1-3 days and bulk lots 15-30 days.

Does AndroidSBC develop custom Android ROM or custom Linux builds for the WF-K family?

Answer: Yes. AndroidSBC develops custom Android ROM and custom Linux builds for the WF-K family, with the work scoped against the Osaka requirement and validated on the same production rig that ships Japan orders.

How are software updates and long-term support handled on the WF-K family?

Answer: AndroidSBC maintains a seven-year firmware window on the WF-K family, with staged OTA and rollback. Osaka partners can freeze a revision per Japan project and update on their own schedule.

Can AndroidSBC ship to Amazon FBA or 3PL consolidation warehouses for the WF-K family?

Answer: Yes, and where aan Osaka seller runs its own 3PL arrangement in Japan, AndroidSBC ships to that warehouse on the same terms as a direct buyer order.

How are RMA and DOA replacements handled on the WF-K self-service query terminal family?

Answer: AndroidSBC handles RMA and DOA replacements per production lot, which means aan Osaka partner can trace a failure back to a specific build shipped to Japan rather than dealing with an anonymous board.

Contact AndroidSBC: Start Your WF-K3288 Sourcing Conversation

Osaka integrators can reach the AndroidSBC export desk for the WF-K self-service query terminal family through the following channels:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

A 1-3 day sample lead applies to Japan buyers, a 15-30 day mass-production lead to bulk orders, and a seven-year firmware update window to the WF-K family.