IR Touch Payment Terminal Board with 2D Scan Engine, WF-SPT-04, AndroidSBC, Osaka

TL;DR: IR Touch Payment Terminal Board with 2D Scan Engine

AndroidSBC OEM partnership announcement extending smart payment terminal board availability serving Osaka, Japan. The WF-SPT-04 smart payment terminal Android motherboard covers the face recognition payment terminal build and eleven sister configurations in the WF-SPT series, spanning the RK3576 quad-core ARM Cortex-A72 2.2GHz plus quad-core ARM Cortex-A53 1.8GHz SoC with the ARM Mali-G52 MC3 GPU, 8-inch 1280x800 eDP main panel plus 3.5-inch customer screen, and Android 14 with AOSP baseline and optional GMS firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-SPT family from the Longgang source factory in Shenzhen to Osaka and Japan importers who build countertop payment terminals, self-service kiosks, unattended vending and locker machines, transit ticketing gates and outdoor charging pillars.

About AndroidSBC and the Smart Payment Terminal Android Motherboard Family

AndroidSBC is the export brand of Wanlin Manufacturing Group, a Shenzhen source-factory group that has spent more than a decade on Rockchip and Allwinner payment hardware. The smart payment terminal Android motherboard family covered in this release is the WF-SPT line, twelve configurations built around one peripheral contract so aan Osaka integrator can qualify a printer, a reader and a scan engine once and then move across the whole range. The qualification work happens on the Longgang bench with the actual printer mechanism, reader antenna and scan engine the Japan integrator intends to buy, and the current draw, the print speed and the decode result are written into the shipment file rather than left for the integrator to discover on site.

WF-SPT-04 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-SPT-04 (face recognition payment terminal build) holds the touch panel, the thermal printer, the reader and the scan engine together while running the 72-hour burn-in loop, a configuration that competing single-platform boards rarely document at the top of the temperature window. For Japan importers sourcing the WF-SPT family, the WF-SPT-04-A variant is the typical configuration for the chain pharmacy and supermarket face payment lanes use case, in a payment terminal footprint with a sustained weekly capacity of 5000 pcs/wk.

Challenges in Sourcing Smart Payment Terminal Android Motherboards for Japan Buyers

Payment hardware in Japan is bought against a certification calendar, not a marketing calendar. The board that wins is the one whose compliance file, firmware signing chain and key handling documentation are ready before the acquiring partner asks for them.

The practical answer for Osaka buyers is to buy from a source factory that treats documentation as part of the product: PSE under the DENAN law with the MIC Giteki mark reports, METI / MIC conformity, the compliance set for Japan and a fixed bill of materials, all shipped with the first lot. What Osaka integrators get is a board that repeats: 78400 units now, 78400 more next quarter, the same connector map, the same printer pinout, the same Android baseline, all moving on the Tokyo - Shanghai lane into Japan.

Competitive Comparison: WF-SPT-04 vs Competing Smart Payment Terminal Motherboards

Four differences decide most Japan tenders, and none of them are benchmark scores. They are documentation, peripheral validation, firmware lifecycle and whether the configuration repeats in volume.

• vs consumer tablet boards: the WF-SPT family carries a printer control header, a reader antenna reference design and a scan engine UART mapping, none of which exist on a tablet derivative board.
• vs single-configuration boards: twelve configurations share one peripheral contract, so aan Osaka buyer can move from a countertop lane to an unattended kiosk without re-qualifying the printer or the reader.
• vs boards without a firmware plan: signed images, staged OTA groups with rollback and a published maintenance window come standard, where competing boards ship an image and leave the Japan integrator to manage it.
• vs re-spun designs: the bill of materials is frozen per production lot for the length of the agreement, so the board that passed qualification in Osaka is the board that ships in volume.

Global Cashless Payment, Smart Terminal and Self-Service Checkout Market Trends

Market growth in Japan is concentrating in the formats where a human is not present at the moment of payment, which puts the watchdog, the modem band list and the offline buffer at the top of the Osaka specification.

• Countertop tier: WF-SPT-12 covers contactless, IC card, QR and receipt printing in one board, which is the configuration most staffed lanes standardise on.
• Unattended tier: WF-SPT-03 pairs the modem with the printer header and the watchdog for vending, lockers and kiosks where nobody is there to reboot the terminal.
• Flagship tier: WF-SPT-11 adds the larger memory and storage bundle, the customer-facing screen option and the wider temperature window that outdoor and high-throughput formats require.

The Japan market is large enough to absorb several suppliers and disciplined enough to punish the ones who re-spin boards between lots. Holding the configuration is the strategy, and it is the one AndroidSBC runs for Osaka.

Partner Success Story: Pacific Cinema Networks (ticketing and concessions integrator)

When Pacific Cinema Networks reviewed the Pacific cinema and events market, the shortlist came down to whether a supplier would hold a configuration for the length of the agreement. Pacific Cinema Networks deployed 78400 WF-SPT boards across 41 cinema and stadium sites.

• OEM relationship: AndroidSBC private-label SKU shipped with Pacific Cinema Networks branding and CE / FCC / RoHS files bundled.
• Silicon choice: Rockchip RK3568, RK3566, RK3576, RK3288 and RK3399 plus Allwinner A133, A64, H618 and T527 across twelve configurations, one fixed bill of materials per production lot.
• Payment peripheral package: bundled into the source-factory shipment, covering NFC contactless, IC card, magnetic stripe, thermal printer control, 1D and 2D scan engine, signature capture and the LTE modem band list.
• Unattended-operation tools: hardware watchdog, RTC, auto power-on after mains return, scheduled power cycling, kiosk-mode lockdown, offline transaction buffer and staged OTA with rollback bundled.
• Compliance paperwork: CE / FCC / RoHS plus METI / MIC conformity, all bundled into the Shenzhen source-factory shipment.

According to Pacific Cinema Networks Technical Manager for Pacific Cinema and Events, "Pacific Cinema Networks specifies the multimedia configuration so the customer screen sells the next screening while the printer runs the ticket, and 78400 units are live across Osaka sites."

Field Report: face payment rollout at a national pharmacy chain

SHENZHEN, September 30, 2026 - Meng Yang, AndroidSBC field desk. Field engineering in Japan ran the WF-SPT-04 units through an offline transaction buffer test - network pulled mid-transaction, terminal reconnects, receipt prints, record stores - before release. The WF-SPT-04 payment terminal board order for Osaka, Japan cleared the burn-in station on schedule and is en route via the Tokyo - Shanghai lane.

The WF-SPT-04 face recognition payment terminal build production lot includes the WF-SPT-04-A variant as the typical configuration, with printer current profile, scan engine mapping and staged OTA management bundled into the source-factory shipment. For Japan integrators, the METI / MIC conformity plus PSE under the DENAN law with the MIC Giteki mark paperwork is bundled.

Filed by Meng Yang, AndroidSBC field desk, SHENZHEN. Japanese programmes are documentation heavy, and the test report format is agreed before the sample ships.

WF-SPT-04 Application Scenarios

The WF-SPT-04 face recognition payment terminal build sits inside a twelve-configuration WF-SPT Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-SPT-04-A configuration is the typical build for the chain pharmacy and supermarket face payment lanes use case, with printer current profile, scan engine mapping and staged OTA management bundled.

• Convenience and grocery counters: the WF-SPT-02 takes contactless, IC card and QR at the till and prints the receipt in one pass.
• Restaurant and quick-service counters: the WF-SPT-05 runs order entry, payment and kitchen ticket printing on the same board.
• Unattended vending and lockers: the WF-SPT-03 pairs the modem with the printer header and the watchdog for sites with no staff present.
• EV charging and fuel forecourts: the WF-SPT-09 holds the wide input range and the sunlight readable panel through a full outdoor season.
• Transit gates and event entry: the WF-SPT-08 takes contactless payment and prints the entry ticket without a fixed counter.
• Self-checkout lanes: one board drives the main panel, the scanner and the receipt printer, with the customer screen option where the format needs it.
• Hotel and resort reception: card pre-authorisation, signature capture and folio printing on a board that also runs the restaurant terminal.
• Hospital and clinic payment desks: card, QR and insurance capture on a locked-down build with staged OTA and an audit trail.
• Government and municipal counters: tax, permit and fee payment on a configuration held for the length of the agreement.

Partnership Models for Osaka Buyers

For Osaka partners the choice is between stocking the board, integrating the board or branding the board, and each track carries a different level of engineering support.

• Distribution track: the partner buys the WF-SPT board against a published price list, keeps its own stock, and AndroidSBC supplies the printer profile, the scan mapping and the compliance documents with each lot.
• Integration track: the partner takes the board plus firmware customisation, receipt and language localisation and peripheral validation support, with a joint qualification run at the Longgang factory.
• Private-label track: the WF-SPT board ships under the partner brand with customised boot logo, packaging, enclosure and documentation, on a fixed bill of materials held for the length of the agreement.

Whichever track aan Osaka partner chooses, the board is the same board - what changes is the documentation set, the branding and how much of the integration AndroidSBC carries in Japan.

Frequently Asked Questions

Does the smart payment terminal board family support a face recognition payment terminal build?

Answer: Yes. AndroidSBC builds the face recognition payment terminal build as part of the twelve-configuration WF-SPT family, so the board arrives with its test report, its certificate set and its signed firmware image for Japan.

Which configurations are available in the WF-SPT family for Japan buyers?

Answer: The WF-SPT family covers RK3576 and eleven sister configurations, from the value countertop build to the outdoor sunlight readable build, with one Android baseline across the range for Japan.

Can one smart payment terminal board drive a touch panel, a thermal printer and a scan engine at once?

Answer: Yes. The board runs the panel, the printer header and the scan UART at the same time, which is the configuration Osaka integrators validate during the joint qualification run at the Longgang factory.

What payment scheme certification support does AndroidSBC provide for Japan?

Answer: Certification support for Japan means METI / MIC conformity documentation, PSE under the DENAN law with the MIC Giteki mark test reports and a firmware signing record, all bundled into the shipment rather than sent after customs clearance in Osaka.

What is the minimum order quantity and the sample lead time for Japan?

Answer: The minimum for a customised build is higher than for a stock configuration, but aan Osaka buyer can start with a sample lot, qualify it on the bench, and then move to a production slot without re-qualification.

Is custom ROM, boot logo or pre-installed app development available?

Answer: Yes. AndroidSBC builds the custom image, validates it against the peripheral contract and ships it on the board, which removes the flashing step from the Japan integration plan.

How are firmware updates delivered to a Japan device estate after deployment?

Answer: AndroidSBC manages the Japan estate through staged OTA: signed images, grouped rollout, automatic rollback on failure and a maintenance window agreed with the Osaka operations team.

What shipping terms does AndroidSBC support for Japan orders?

Answer: AndroidSBC supports EXW, FOB, CIF and DAP, quotes Port of Tokyo as the default port for Japan, and prepares the customs file before the container closes for Osaka.

Contact AndroidSBC: Start Your WF-SPT-04 Sourcing Conversation

Every Osaka programme starts the same way at AndroidSBC: the format, the peripherals, the certification calendar, then a quotation that holds the configuration for the term.

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

Wanlin Manufacturing Group builds the WF-SPT family in Shenzhen and exports it through AndroidSBC to Japan and more than 60 markets. Osaka enquiries for samples, price lists and certification files are answered within one working day.